Date: Tue, 11 Nov 1997 07:07:49 -0500 From: ron hathaway <ezforunopsamdnet.att.net> Subject: Re: how to clear 89 clarion anti-theft radio
Holding down the band button is the proper way to clear codes on that model radio. If the wrong code was put in three times the radio will lock up and must be left on with the ignition switch in the on position for about an hour. Chris wrote: > Hey Greg, > I had a similar problem on my 92 stock radio. I wound up > holding down the radio tuning button for about 2 seconds, until it > beeped and cleared the code, then reentered the proper code and it > worked. I don't know if it will work on yours. Good luck! > > --Chris > > On Sun, 09 Nov 1997 21:46:59 -0600, gbfnopsamay.net (Greg Franks) > wrote: > > > > >i have a 89 900s with the stock clarion anti-theft radio. > >several times after having the battery disconnected, > >i had to enter the 4-digital code (which i know) to get the radio > >to work again. the last time this happened, i entered 1 wrong digit of the > >code and the radio locked-up. i thought that if i disconnected > >the battery, then i would be able to reenter the code and the radio > >would work again; it did not. even after leaving the battery disconnected > >for 2 hours, it is still locked-up while displaying the wrongcode that i > >entered. > > > >how can i get my radio working again? > > > >thanks.
 |
 |
 |
 |
 |
