Date: Mon, 2 Nov 1998 14:32:34 -0000 From: "Estwick George" <estwicknopsamil.com> Subject: Re: HELP! take off '86 9000T dash!
Hi Chris, To remove the dash panel, you need to remove the gear lever gator, the radio, 2 DIN panel covers and the 2 little trims that sits between the air con. switch/seat heaters and rear fog/front fog switches. Behind these trims, resides the panel screws (torq type) - remove them, then pull out the heat control knobs (3) and remove the 2 screws. Pull the panel out gently, & carefully note the location of the heater vent director lever, then squeeze your hand thru the recess available & gently push the centre air vent outwards. Slide the centre air vent assembly back into the hole in the dash. The dash panel should now lift out by gently pushing it downwards to release the top clips and pulling forward. Hope this helps. Regards, Estwick. toastynopsam.vipmail.com wrote in message <363cb7e8.247958746nopsam.ime.net>... > >hello, i am trying to replace the vacuum tube under my dash. i have >gotten the top part off, but i do not know how to get the black part >facing me, or the bottom part.. please help as my car is sitting in my >driveway dismantled. thank you. > >-Chris