Date: Tue, 15 Aug 2000 17:34:10 GMT From: "Keith Grider" <keithnopsamidaytech.com> Subject: Re: Setting base idle on a LH2.4
Ken, All the information on setting the basic idle is for a cadmium plated 3 wire AIC on saabnet as well as townsend. I have the LH2.4 which has the 2 wire AIC. I know it should be very similar, but the wire to ground and close the AIC is not the same color on my LH2.4 as the LH2.2, and I do not know where it is. I have tried to set basic idle by disconnecting the AIC and plugging the hoses, but that does not seem to work as I get codes telling me that the AIC pulse width is out of range. I am guessing that the AIC does have a slight leakage around the valve which affects basic idle setting. Thanks for the help though. Keith Grider "Ken Washington" <kenwashinopsamhlink.net> wrote in message news:39997D0C.44AC29D9nopsamhlink.net... > Check the FAQs at www.saabnet.com or the tech info at www.townsendimports.com > > Ken Washington > 87 9000S > 87 900S > 83 900T > > > Keith Grider wrote: > > > Group, > > > > There is a faq on the setting of base idle on a LH 2.2. I have a LH 2.4 > > bosch fuel injection. I have done a search on it, and cannot find out the > > procedure to set base idle as it is different than the LH 2.2 (gold 3 wire > > AIC valve). I assume it it similar to the LH 2.2, but would like some > > pointers. > > > > Any help? >
 |
 |
 |
 |
 |
