Date: Sat, 23 Sep 2000 16:45:58 -0400 From: "sthu" <si_thunopsamcity.com> Subject: Re: Quality report for 99 9-3
The plastic piece I am talking about is about 1.5 in by 3 in. It surrounds/molds the ignition switch. I was doing my monthly cleaning and it was loose. I pulled it lightly (not yanked) and it came off (BTW, it was glued to the base). There is a little circuitry under neath that small cover, and looked very delicate. I put it back but it just seemed cheesy. I just might "crazy-glue" that thing. That's what happend for cleaning and washing your car; I should have left it dirty. You know what they say "Ignorance is bliss". "Brian Greene" <Delinquent1nopsamdnet.att.net> wrote in message news:mx4z5.2998$6T.260880nopsamsc05-news.ops.worldnet.att.net... > Didn't you get a 3 year 50K mile warranty? All of the problems you listed > are covered, except for the misplaced back seat adjuster. That is a tight > place to reach when the door is closed. I've got a '00 9-3 and the only > 'problem' I've experienced to date (knock on wood) was the carpet popping > out from underneath the front of the doorsill cover on the drivers side. Of > course I thought the lack of a cooling fan when the engine shut down was a > problem as well. > > How did the plastic in your center console start coming apart? > > Brian > > > "sthu" <si_thunopsamcity.com> wrote in message > news:J0%y5.14843$Ao1.2741336nopsamrump.sjc.telocity.net... > > We have a 1999 9-3 (bought it new but has 14K miles now) with following > > observations: > > 1. Plastic mold around the ignition switch, between the seats, is comming > > off > > 2. Rear passinger door window-switch keeps poping off > > 3. Water drops from A/C get on your foot (once or twice an hour, but > > annoying) > > 4. What's the deal with seat back adjuster next to the B-pillar? > > 5. Passinger side black plastic air louve (next to the fog light) is loose > > (I have seen other 9-3 missing that piece). So check yours. > > > > > >
 |
 |
 |
 |
 |
