Date: Tue, 17 Apr 2001 04:18:57 GMT From: "Sue & Rodel Padua" <paduanopsam.com> Subject: Re: 95 900S wiper problem
Always check the easy stuff first. The arms are held in place to the motor shaft with nuts that can loosen. Pop off the cover at the base of each wiper arm, position the arm where it should be and tighten the nut. Do this for the back wiper too. Hope that helps Rodel "RP" <rp911nopsamo.com> wrote in message news:3ADBCC40.7C0Fnopsamo.com... > My wipers will not park in the correct position on my 95 900S; on the > intermittent setting, they go to the top and stop, then go back down, > and stop again. On the normal setting they go back and forth as they > should, but they park at the top instead of the bottom. Can this be > corrected or is it time for a new motor? > > Vic > 95 900S
 |
 |
 |
 |
 |
