Date: Wed, 25 Jul 2001 12:20:08 -0400 From: "gc" <gcourtnaynopsamail.com> Subject: 900s clutch
The clutch on my 900T was replaced about a year ago, with similar symptoms. However I had to replace the slave cylinder (could not be rebuilt) as well as the plate. The clutch would dump when depressed due to the slave cylinder simply not holding pressure. Yes, a hydraulic problem! The wear on the clutch can be checked through an inspection window above the clutch, at the front (rad end) of the engine. And of course clutch replacement is very easy since the engine is in backwards (those crazy Swedes!) Good luck! Guy