Date: Mon, 25 Feb 2002 02:30:43 GMT From: "joe" <someonenopsamere.com> Subject: Re: 9000cs air ventilation vent removal
The passenger vent is actually part of the glovebox ass'y. If you open the glove box and take out the screws securing it around the perimeter of the opening, and carefully pull it out a little (the light in the back is wired in) so you'll have to hold it there or disconnect them. The vent receiver is simply pushed into a plastic duct; it will come loose but its a little tricky to get back together. Look at how the vent has come loose and FIX IT LIKE A MAN!!! HELL, I HAD NO BOOK OR ADVICE AND TOOK MINE APART JUST TO REPLACE THE BULB. Actually I wouldn't have guessed that was how it was held in there either. -Warren "Bryan" <bryanjnopsamibm.com> wrote in message news:d109d6a.0202241536.71b5e66bnopsaming.google.com... > The plastic trim / fascia surrounding the passenger air vent is loose, > & therefore rattles. Can anyone tell me I can either remove the > passesnger air vent & / or the plastic trim surounding the vent? > > Then I can see how it should be fixed to the dash & fix it. > > thanks > Bryan