Date: Mon, 18 Mar 2002 04:17:12 GMT From: "Harry Davis" <harryedavisnopsami.com> Subject: Re: How to change the gear-shift.
I have a 1996 9000 CS and the shift pattern is on the insert in the top of the knob. It's stuck in with two sided sticky foam tape. The original tape stopped sticking so I had to replace it. The replacement has worked fine for a couple of years. So you should be able to pry the insert out of the top of the knob and reverse it. I would use new tape. "Inky" <yada_yada_etcnopsamail.com> wrote in message news:3c955741.16178939nopsam.CIS.DFN.DE... > I don't know much about a 9000 CSE but on an '85 900, the knob is just > stuck on with pressure. It's not screwed on and doesn't have any set > screws. I just twisted and pulled mine until it came off. > > -- christian > '85 900 w/ 155k > > > On 17 Mar 2002 01:27:48 -0800, ludohaelvoetnopsamail.com (Ludo > Haelvoet) wrote: > > >Hello > > > >I've bought a 2nd hand 9000 CSE. I noticed the the sheet with the > >indication of the gears on the gear-shift is upside down (above we > >have 2, 4, R down we have 1, 3, 5). > >I wonder if it is possible to twist the gear shift, or the upper part > >of it, a half turn. To save money, I prefer to do it by myself. > >Does anyone of you know how to do this? > >All help is greatly appreciated. > > > >Cheers > > > >Ludo Haelvoet
 |
 |
 |
 |
 |
