Date: Thu, 02 May 2002 05:01:57 GMT From: FatHoss <Fatnopsam.com> Subject: Re: 9000 Windshield Washer Reservoir Access
I would think your best bet is to remove the bumber and front valance in one piece. Remove the 4 screws securing it to each of the fenders and the 2 main bumper bolts. That should give you plenty of room to either work on the problem in place or drop the entire tank. On Wed, 1 May 2002 18:43:52 -0600, "JK" <Jay(spamfree)nopsamlworldadventures.com> wrote: >95 9000, aero, US. I need to get to the bottom of the tank and replace the >rubber hose leading back and up to the windshield. The hose is soft/rotten >and routinely pops off at a connection point on passenger side of engine >block (designed I think so you do not burn out your pump in the event of a >blockage in the line). How do I get to the reservoir/tank? It appears to be >buried under the left front quarter panel. Surely there's easier access than >that?? > >Thanks in advance. > >Jay >