Date: Thu, 4 Jul 2002 21:53:34 -0400 From: "KGee" <greenstingnopsam.com> Subject: Re: transmission - reverse
Since the trans is "popping" out of reverse, have the plastic piece checked to see if its binding the linkage (under the leather boot). A broken motor mount can cause this too, but not as likely. The most likely is the transmission is due an overhaul focusing on the reverse synchronizer assy. "Alexander Popov" <no-spamnopsamse.com> wrote in message news:1025795466.295434nopsam.acecape.com... > Have the shift linkage checked. There are couple of plastic inserts and > spacers that hold the linkage in place. I have the same car and managed to > pull one of those out of its place while enjoying a spirited ride on a > mountain road. Lucky for me nothing was broken and I managed to put it back > in place. > > Good Luck, > > Alex > > "SHABRE" <no1atallnopsamere.com> wrote in message > news:3fQU8.1611$sX.1331nopsamdc04.gnilink.net... > > ok, so i just got this beautiful 900 SE... the v6 and reverse is not > working > > too hot... you have to pull the shifter back and hold it while you come > > off the clutch... and you have to get it just right or you grind somethin > > fierce.... i figure i should be able to just put it in reverse, and > go.... > > i've had several people now drive it and they all find the same problem > i've > > had.... is reverse just done? what is required to fix it? new tranny? > > it's really getting to be a little much having to park facing uphill..... > > thanks > > > > >