Date: Wed, 03 Jul 2002 20:00:56 GMT From: John Davies <johndaviesNOSPAMnopsam.net> Subject: Re: Glass mount cellular attenna removal
On Mon, 1 Jul 2002 22:34:41 +0100, "Roger Hyde" <rogerhydenopsamorld.com> wrote: >I am in the throws of restoring a '92 9000 CS Carlsson which has in the past >been equipped with a celluar in-car kit. > >I have removedthe holder and harness, but there is a glass mounted antenna >on the hatch glass that I would like to remove. > >Any ideas how I can get this ugly thing off without damaging the glass, it >consists of a 2" square plate on each side of the window, the innner one >connecting to the cable and the outer one to the antenna itself. > >Thanks > I suggest fishing line - the same method for removing stuck-on body badges. Use some lacquer thinner or similar solvent to get off the residue. If you need to scrape, use a sharpened piece of hard plastic like plexiglass, not a putty knife, and you will not damage the glass. John Davies Monroe WA USA 2001 Saab 9-5 Aero Wagon 2000 Audi A4 quattro 1.8T 1991 Jeep Cherokee Laredo 4x4