Date: Tue, 15 Oct 2002 08:33:12 -0400 From: Bob <uctraingNOSPAMnopsamanet.com> Subject: Re: Wiper Fluid Motor
On Mon, 14 Oct 2002 20:46:12 -0400, KeithG <noonenopsamspring.com> wrote: > >ng900 washer motor. It feeds the front and rear nozzles by running in 2 >different directions. It is complicated by the use of check valves. The >line that runs to the rear has a check valve near the pump (Why?, >because the pump is not powerful enough to have one at the rear where it >is needed!). These must work or else it will probably not deliver enough >zip to spray. Make sure it is running, If not, check for power at the >motor when the stalk is pulled. If so, the motor is bad. buy and replace >motor AND the check valve on the line running to the rear. Also, you should be able to hear the pump motor when you pull the stalk on the column. That will give you a rough idea of whether the motor is running at all. Bob
 |
 |
 |
 |
 |
