Date: Mon, 14 Oct 2002 20:46:12 -0400 From: KeithG <noonenopsamspring.com> Subject: Re: Wiper Fluid Motor
ng900 washer motor. It feeds the front and rear nozzles by running in 2 different directions. It is complicated by the use of check valves. The line that runs to the rear has a check valve near the pump (Why?, because the pump is not powerful enough to have one at the rear where it is needed!). These must work or else it will probably not deliver enough zip to spray. Make sure it is running, If not, check for power at the motor when the stalk is pulled. If so, the motor is bad. buy and replace motor AND the check valve on the line running to the rear. KeithG pperduenopsami.com wrote: > 1995 Saab 900. The wiper blades and the rear lights (on the same > circuit , I guess) work fine. No wiper fluid comes out of the > nozzles. Is the fluid motor on a different circuit? Could this be a > fuse? What else can I check/do? (Yes, I topped off the fluid.)