Date: Fri, 28 Feb 2003 14:41:04 -0000 From: MeatballTurbo <carl.robsonnospamcing-czechs.com> Subject: Re: weird apc
In article <b3lmpr$b83$07$1nospam.t-online.com>, simon.putznospamline.de says... > Hi, > > recently the difference between apc boost and base boost on my car was very > small. ok i fumbled around with the hoses a bit and i broke off a little bit > of a connector on the apc solenoid but that was nothign serious. so after > some research i found that basically my apc solenoid is a switch that should > switch between C-->R and C-->W. > so i checked the solenoid out at home and i found that with +12VDC between > pin 1 and 2 i can blow through C and W > but with +12VDC between pin 2 and 3 i can blow through W and R > now this is strange, did saab label my solenoid wrongly or whats going on. > any help is greatly appreciated. im now going to install the valve as if W > were C and keep you updated > i uploaded some pics at http://80.86.187.144/apc > Simon, is this on a Classic 900? The APC solenoid on mine looks nothing like that? It has the three barbs, but they are all in line horizontally not vertically, and the stick out at angles, rather than being in a parallel line. -- Carl Robson The poster formally known as Skodapilot. http://www.bouncing-czechs.com
 |
 |
 |
 |
 |
