Date: Tue, 17 Jun 2003 09:35:26 +0100 From: MeatballTurbo <carl.robsonnopsamcing-czechs.com> Subject: Re: My base boost probs: Thanks Paul H, Grunff and KeithG
In article <BB147B97.6FF4%pjghnopsamyonder.co.uk>, pjghnopsamyonder.co.uk says... > > Don't get the FMAC900 from Forge though - it's for the NG900. When I bought > one, Forge said it was for all 900s and when I rang back informing them it > didn't fit, they said they don't make an FMAC900, despite it being on their > website. Grrr. Once I'm refunded, I'm getting a Trent actuator and disabling > the fuel over-pressure switch, which seems to want to cut in at lower > pressures than usual on uphill runs. I'm "putting up" with about 8 PSI at > the moment and want my boost spikes back :) > > Thanks for the Tip about the actuator. I would have thought any Actuator designed for a Garrett T3 would do the job? I will probably leave that for now, and go with APC mods to eak a bit more out. As you know, I'm trying to keep costs down for now (hence buying a £30 Race-X cone, instead of £50 K&N) and sFs vacuum hose instead of Samco, and planning to get the middle box replaced with Straight pipe, instead of getting a full single box system.. -- The poster formerly known as Skodapilot. http://www.bouncing-czechs.com