Date: Wed, 30 Jul 2003 13:10:52 +0100 From: Grunff <grunffnopsam.com> Subject: Re: Mixture problems and lumpy idle
Paul Halliday wrote: > Am I going the right way about this? The Haynes says to set the idle first. > Am I doing this right? It then says to set the mixture correctly by > measuring the exhaust gas. Is there something I can buy to check this? I > have no cat, so I presume I can measure the gas at the rear of the car at > the exhaust outlet. As Carl says, check the cold start injector - they sometimes leak. Remove it when the engine is hot, see if it dribbles. Have you cleaned out your idle control valve (by the thermostat housing)? If not, remove it, empty half a can of carb cleaner into it, followed by a generous amount of WD40. You will see lots and lots of soot coming out. Have you cleaned out the throttle body + butterfly? Again, lots of carb cleaner followed by a bit of oil. -- Grunff