Date: Thu, 18 Dec 2003 23:33:19 +0000 From: Grunff <grunffnopsam.com> Subject: Re: failure to start
Colin Stamp wrote: > Hang on a minute! > > Surely the order being correct will only make sure that the plugs all > fire on the same stroke. If you want to make sure that's the correct > stroke then there's only one cap terminal that's right for each plug. You're right - there are two sets of positions which would work and two which wouldn't. The positions I posted (repeated below) are correct. Looking at the distributor cap, take the lead coming out of 3 oclock to cyl 1, the lead at 12 oclock to cyl 3, the lead at 9 oclock to cyl 4 and the lead at 6 oclock to cyl 2. 1-3-4-2. -- Grunff