Date: 10 Jan 2005 12:17:34 -0800 From: dyerpartsnospamail.com Subject: Re: 94 9000: How do I access the relays behind the fuse panel?
OK, after a second trip to my dealer, I have the definitive answer. For those who are interested: 1. Open the fuse panel cover 2. Locate the round black 'rivets' on the aft end of the cover 3. Push a sharp instrument aprox 1/16" into the center of each black rivet 4. The black rivets can then be pulled out 5. Remove the fuse panel cover and uphostery 6. Remove the two screws holding the fust panel in place 7. Slide the fuse panel down and aft to access the relays Hope this helps someone. dyerpartsnospamail.com wrote: > I have a 1994 9000CSE and need to replace the turn signal relay. It is > located somewhere behind the fuse panel above the passenger side floor > / below the passenger airbag. > > I am completely stumped as to how to access the relays-- I can seem to > figure out how to remove the interior panels to get to them. > Does anyone have advice? > > Many thanks in advance.
 |
 |
 |
 |
 |
