Date: Thu, 24 Feb 2005 17:27:49 GMT From: Emmy Dubbs <matthewdcnospamspring.com> Subject: Re: Electric Seat
Fred Very nice, with your help only took me about a half hour to find the socket...although it was exactly where you said it would be. Turns out, there are two sockets for a relay. The first one I plugged it into did not work. So I pulled it and plugged it into the second socket and that made the seat work. Any idea what the second socket would be for? Thanks a ton (metric ton if your over there) Saved me couple hundred $ plus time. Matt On Thu, 24 Feb 2005 09:26:09 -0500, "The Malt Hound" <matthewdcnospamspring.com> wrote in message >news:i8ap11534slehtkrfd7pdjs0c6p087t9a3nospamcom... >> Hello New Problem w/ 1997 900 SE Turbo Convertible. Last night my >> wife tells me that the passenger seat adjusting doesn't work - >> electric seats - all of a sudden stopped. Yup, I check the >> fuses...but they are fine. So I get on the garage floor (first time >> I've had a car in the garage ever!) and start poking around. >> Eventually with a flashlight, I see a thing loose on the floor of >> the >> car under the seat, in between what looks like servo motors. I >> reach >> for it, it's loose and I grab it. It's a bosch relay of some sort, >> about 1/2" cube. I find part # on it, google search and it comes up >> as a bosch relay. I search under the seat, which is tough because >> there is NO room under there. I look for a similar deal under the >> driver seat and don't see it there. Help!. >> >> Matt > >Matt, > >It looks like the relay should plug into a socket somewhere near the >front edge of the seat bottom, up underneath. You may need to get a >mirror to see up there. The orientation should be horizontal, with >the relay pins toward the front of the car. > >Good luck, >-Fred W >
 |
 |
 |
 |
 |
