Date: Tue, 31 Jan 2006 22:33:00 -0500 From: ma_twain <ma_twainnospamo.com> Subject: Re: Power seats in C900
The mounting brackets for the C900 seats varied through the years. The 1985 C900 seats were attached by 4 10mm bolts. One car used 2 hooks and 2 bolts. The 1993 uses four TORX screws. So, before you buy a seat, check how it attaches and see if the hole pattern matches. BK wrote: > Some questions about replacing the unpowered seats in my '86 c900 w > powered from a later c900: > > 1. Do the power seats in the later c900's use a simple 12v lead or do > they need to be run through a regulator or something? In other words: If > I went to put one in my older c900 w/o power seats, could I just run a > fused line off of an unswitched hot power feed? > > 2. What amperage fuse would they require? > > 3. Would the seat heaters run off the old heater system (on/off), or > would I have to rig up the thermostat that the newer c900 used. If I do > have to use the thermostat, how would you wire it? > > Jeremy
