Date: Tue, 14 Feb 2006 16:52:37 GMT From: "john" <jsmith1456nospamo.com> Subject: Re: C900 dangling connector
"James Sweet" <jamessweetnospamail.com> wrote in message news:5XnIf.5196$Lr.235nospamdc01... >> >> Where, specifically? On a corner, maybe? I haven't seen one fail there >> before, so just out of personal curiousity, I'd like it if you'd >> describe the location. >> > > There's a coolant passage very close to the cam chain on the firewall end > of the head, it formed a small crack right between that and the space > where the chain goes down to the crank. I think we got a picture of the > crack, I'll have to get it from the guy who was helping me do the job. > > >> >> Radiator fan? Can you describe the shape of the connector? The rad fan >> connector is a d-shaped with 2 round pins maybe 2mm in diameter each? >> > > Both fans are plugged in and working. It's the same type of connector that > plugs into the idle speed motor except 2 pin instead of 3, it sprouts from > the same section of harness. I'm guessing the wire could be for an Auxiliary air valve that was fitted to some variants...
