Date: 5 Mar 2006 19:51:03 -0800 From: "R. Frist" <rhfristnospamzon.net> Subject: Re: Headlight wipers
Try pulling the blades away from the headlight so they snap into position pointing outward away from the car. Then, run the washers for several seconds (maybe with the headlights on depending on the model of the car). This insures that the blades will not run into the bumper or stop should they be so out of position. If your lucky when you snap the blades down against the glass they will be in the normal resting position. If not, you can undo the nut thet holds the blade on the splined shaft carefully tap off the blade and reset it to the normal position.
 |
 |
 |
 |
 |
