Date: Tue, 14 Nov 2006 22:59:32 GMT From: - Bob - <uctraingnospamanet.com> Subject: Re: 1996 saab 900s - a little help?
On 13 Nov 2006 15:21:06 -0800, "eylem" <kahve.tortusunospaml.com> wrote: >charles, > >i will be sure to pick up the manual as soon as possible, and proceed >carefully after that =). thank you for your input, i was really worried >about this. > >eylem. You will need to find a Haynes manual for this car. It's not published in the USA if that's where you are but some companies import them and resell. Post here if you can't find one. It's possible the simply disassembling the brakes, cleaning the sliding parts, and greasing with a proper (special) brake grease will stop the noise. But, if you are going to do all that, you might decide it's worth replacing the pads too - labor is the same and it will definitely cure it. However, if this is your first car, I would not advise doing brake work as your first endeavor unless you have an experienced mechanic to help you do it. Brakes are important :-)
