Date: Wed, 17 Oct 2007 18:56:07 -0400 From: "rkr" <ronrath28nospamail.com> Subject: 2000 9-5 High Beam Wiring
I have one high beam that works and one that doesn't. I don't have a wiring diagram but it appears that the output of the High Beam relay has a single contact that feeds both HighBeam fuses. I can measure continuity from the relay to the fuse of the HighBeam that works and cannot measure continuity from the relay output to the fuse of the high beam that doesn't work. I also cannot measure continuity between the two fuses. Can someone check a wiring diagram to see if my assumption is correct or is there something else in the path between the relay output and one of the HighBeam fuses? Thanks much, Ron Rathburn PS: Also checked the voltage at the "broken" HighBeam and it stays at 0.
