2003-2011 [Subscribe to Daily Digest] |
[Main 93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: I've never had to replace an MCC resistor Posted by Chadwick [Email] (#569) [Profile/Gallery] (more from Chadwick) on Wed, 20 Jun 2012 12:14:18 In Reply to: Re: I've never had to replace an MCC resistor, Rich, Wed, 20 Jun 2012 10:26:15 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Push in the pin for the cowl, remove it, pull up the weather stripping, then pull up on the passenger side of the cowl and bend it out of the way. Remove the cabin air filter, then remove the two snap clips that hold the cabin air filter box to the bulkhead. It will give some resistance as you remove it while the tape breaks away.
To remove the blower, remove the glove box, the side trim on the center console, the plastic knee bolster, the air vent tube from the side of the heater box, disconnect the wiring, and remove all the little T20(?) screws that hold the assembly in.
I have one on the shelf, but I dare sell it after the nightmare I just had selling someone else a part online. Try eeuro? The MCC one is way cheaper than ACC.
-Chad
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.