2003-2011 [Subscribe to Daily Digest] |
Members do not see ads below this line. - Help Keep This Site Online - Signup
Although it focusses on volvo but it says SAAB too. It would be so nice to get out of the GM dealer merci, Tech2+software stick + $$$$.
Read DTCs
Clear DTCs
Read live data stream
Single Brand of all Models ( OBDII-16 DLC )
Full system diagnosis
Upgrade via USB 2.0
Multi-language
OBDII function:
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle’s on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to the vehicle’s service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM datastream
13. Support CAN (Controller Area Network) and all other
14.Multilingual menu and DTC definitions- English, Spanish, and German, etc
15.Read pending DTCs
16.Read permanent DTCs
17. DTCs search
18. Supports all the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on all 2001 and later OBDII compliant PETROL European vehicles
20. Works on all 2004 and later OBDII compliant DIESEL European vehicles
21. Works on all 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
System coverage:
ECM
Diesel Eng
TCM
ABS
SRS
CEM
UEM
REM
DIM
PDM
PSM
DDM
CCM
PHM
AUM
SWM
SAS
RTI
AEM
CPM
ETM
DEM
HCM
KVM
RDAR
SUB
CVM
DABM
PAC
TRM
AUD
ICM
MMM
PAM
IAM
BPM
SUM
PBM
HLDF
POT
AUU
FSM
CI
MP1
MP2
ATM
GPS
EPS
AFM
PSL
PSR
posted by 174.114.114...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
 |
 |
 |
 |
 |
