The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!


Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Photo Gallery for TonyJ

PrevUpNext

Saabnet.com Members can also view the larger 1600 x 1064 version

Headlite aimer, radiator drain tool
When the plastic right angle drive gears strip, you can still aim headlites by using this ~ 6mm squre drive socket made from a 1/4" one with square brass tubing pressed in. Radiator drain tool is from old deep 1/4" drive socket.

Last modified: Jan 21, 2006

PrevUpNext


TonyJ's Pix | Saab Tools You can Make (Shop)

This album contains 6 photos and 0 albums.


All of them
Big wooden thing is for straightening the inside of bent 15" alloy wheels using a bottle jack to apply force thru a small wood block to the opposite side of the rim.
Last modified: Jan 21, 2006

Valve Tools
Seal remover (grind old needle nose pliers), lifter bore protector (plastic pill bottle), Valve compressor extender (cut hole in old 21mm deep socket) , seal installer (old 1/4" socket)
Last modified: Jan 21, 2006

Upper torque strut bushing remover/replacer
Made from various plumbing and hardware items. Use grade 5 or 8 3/8 bolts of various lengths. Hardware store threaded rod isn't strong enough and may snap. Use heat on the outside to expand the aluminum. Apply assembly grease on the new one.
Last modified: Feb 12, 2006

Headlite aimer, radiator drain tool
When the plastic right angle drive gears strip, you can still aim headlites by using this ~ 6mm squre drive socket made from a 1/4" one with square brass tubing pressed in. Radiator drain tool is from old deep 1/4" drive socket.
Last modified: Jan 21, 2006

Power Bleeder, Fuel pressure test adaptor.
Add a fitting to an old master cylinder cap (If you buy it at a junkyard, say its for clutch -- they can't sell brake parts here (New England, USA). Per Saabnet post, buy used fuel rail banjo bolt from SobStory, then drill a hole & solder in 1/4 tube
Last modified: Jan 21, 2006

Using the valve tools with a standard valve spring compressor
Last modified: Feb 12, 2006


StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]