Date: 3 Dec 1998 02:12:09 GMT From: "EKC" <ekchannopsamdnet.att.net> Subject: Re: 95 900S FOG LIGHT QUESTION
A. Thomas/C. Hollinger wrote in message <3660363E.47398229nopsamr.net>... >How do you change the H3 bulb in the fog light housing? There are two >bolts above the fog light that attach the fog light housing to the the >car. I removed the two bolts but it appears that the housing is >attached to something else behind the vinyl bumper. I noticed that >underneath the car there is a vinyl splash shield. Do I have to remove >this shield to get the to the bulb? > >I have worked on cars a lot but a simple fog light has me stumped. Any >help will be appreciated. > >Andy > Andy, I did it a few months ago on my 95 900S. It is doable but not very straight forward. Remove the splash guards and also the lowest unpainted portion of the bumper (not the whole bumper). Take the fog lamp housing out and change the bulb. The trickest part is to remove the low bumper guard. It is difficult to do all these on a flat ground. Much easier to have the car raised up (make sure you have it secure so that it won't fall on you). Good luck! Eric