Date: Thu, 10 Dec 1998 22:26:52 -0800 From: "Rob & Gretchen Perry" <syllablenopsamks.net> Subject: Re: SAAB headlight wiring problem???
My first suggestion would be to check the wire/plug where it attaches to the bulb for light oxidation. Clean lightly with emery cloth. GarDian wrote in message <366e459f.32922963nopsam>... >Hi, > >Yesterday when I was driving. I switched to high beam, and the >computer showed "+ headlight failure" (driver's side) and the blue >high beam mark in the instrument panel won't light up either. > >When I got home, i checked the bulb, doesn't seem to be burned out, I >put in a new bulb, the high beam on the driver side still won't lit >up. (low beam was okay though) The headlight fuse is okay too. > >I was going to my dealer today to check the problem, but this morning >I found out that the high beam is okay now! I put the old bulb back, >and indeed it was okay. > >I suspect there may be a wiring problem, like a loose connection... or >some sort. > >Can anybody give me a suggestion?? Should I still go to the dealer >and check the car out?? > >Thanks, > >GarDian >gardian.gnopsamnet > >