Date: Sun, 15 Aug 1999 23:33:12 +0200 From: ben.gurionNOSPAMnopsamnet (ben g.) Subject: Re: Exploding turbo plumbing: do up your hose clamps.
Dean Malandris <wwwnopsamus-technologies.com> wrote: > >-where is your APC needle at max..... > > Well I took it out onto the open highway this afternoon. Full throttle in > fifth, hit around 150km/h before the tight curves came up, and it went > half-way into the red zone. ... eavenly or with little 'kick backs' (knock sensor kickin' in due to valve pinging ).....?! > Before adjusting it, the needle only went part way > into the yellow zone... didn't even reach the vertical. ever checked basic boost before....? > >-how do you know you don't fry your engine...... > > Simple... we were cruising at 180km/h on the way back and nothing exploded sure, _as long_ as you're cruising the engine is not overboosted.....;-) > and that pot is the furthermost one on the right of the PCB, marked > "P". sorry, i don't know what or where the PCB is...is it the APC unit you're talking about...? -- so long... ben
![]() |
![]() |
![]() |
![]() |
![]() |