Date: Tue, 15 Feb 2000 16:05:31 GMT From: malcolm532nopsameja.com Subject: Re: Winshield Washer
<Snip>Dan, If the jet it'self isnt blocked then check out the little valves just below the nozzle, ie the little round thing with a hole in it. Anyway pull off the short hose to the jet and the long hose from the feed and check that the little rubber thingy inside isn't blocking the flow. I think this is like a one way valve to stop the fluid draining back to the tank and or out of the headlight wash/wipe system once you have finished washing. Anyway this starts to disintegrate after a while and start to bung up the plumbing as I found out on my old 900. Hope this helps Malc Scotland Sent via Deja.com http://www.deja.com/ Before you buy.