Date: Tue, 27 Jun 2000 14:19:20 GMT From: "Keith Grider" <keithnopsamhallidaytech.com> Subject: Re: loud CLUNK on 96 900SE under braking
Remco, Was this a rear caliper or the rear most bolt hole on the front caliper. I am positive that the noise is coming from the front and not the rear. Thanks, Keith Grider "remco" <remcownopsameja.com> wrote in message news:8jabp1$9in$1nopsam1.deja.com... > On my '84 900S I had something similar happen: one of the holes that > mount the rear brake was worn such that it became elongated - so the > brake assembly was able to move back and forth when breaking hard > enough. > Hope you find your problem. > remco > > In article <wzM55.10$4h3.1264nopsamoon.columbus.rr.com>, > "Keith Grider" <keithnopsamhallidaytech.com> wrote: > > group, > > > > I have a 96 900 se with 45kmi. I have had it 6 wk, and all is well > except > > when I brake really hard (enough to cause operation of the ABS on dry > > pavement), I hear a loud clunk on the right front (I think). The car > tracks > > straight, turns the same side to side, and there is no evidence of > body or > > suspension repair on either side. I thought this may be the RF strut, > but it > > is tight. Any ideas? > > > > Thanks, > > > > Keith > > > > -- > > Keith Grider > > Halliday Technologies Inc. > > (remove HATS from email address for reply) > > > > > > > Sent via Deja.com http://www.deja.com/ > Before you buy.
![]() |
![]() |
![]() |
![]() |
![]() |