Date: Wed, 27 Sep 2000 20:55:23 GMT From: "Ask The MasterTech" <Tsykesnopsamd.rr.com> Subject: Re: 900 gear shift
What has probably happened is there is a gate adjuster pin underneath the shift ball. It probably needs to be turned clockwise to cure the problem.Hopefully this will help. TW 39d08e38nopsam284.daytonoh.ncr.com... > I wonder if anyone out there can assist ? > I'm having experiencing a 'notchiness' changing up and down in my '90 900 5 > speed gearbox. Milelage - 110,000. > I've recently changed the oil with 10W 40 motor oil (as recommended by > Haynes) and this has helped a little. > The owners club technical guru says to check the gearshift rod coupling > between transmission and rod, but I'm not sure where these actually are > located. > The trouble (looking at the workings of the gear lever and attached rod > inside the cabin), appear to be in the gearbox itself. > Question :- > What are the worn bits to look for and how do you get at them to replace ? > > Any advise / info would be most appreciated, > > Steve. > >