Date: Fri, 03 May 2002 10:41:31 GMT From: ke2tnnopsamoot.rem0ve.com (John Strowe) Subject: Re: 9000 Windshield Washer Reservoir Access
Remove the wheel. There's a trim piece around the wheel opening with nuts inside the wheelwell, remove it. Then you can remove the plastic wheelwell liner from the fender. Once you do that, you will have access to the reservoir. Good luck, John "JK" <Jay(spamfree)nopsamlworldadventures.com> wrote in message news:7Z%z8.223$AS3.109026nopsam.uswest.net... > 95 9000, aero, US. I need to get to the bottom of the tank and replace the > rubber hose leading back and up to the windshield. The hose is soft/rotten > and routinely pops off at a connection point on passenger side of engine > block (designed I think so you do not burn out your pump in the event of a > blockage in the line). How do I get to the reservoir/tank? It appears to be > buried under the left front quarter panel. Surely there's easier access than > that?? > > Thanks in advance. > > Jay > >