Date: Mon, 8 Jul 2002 14:17:16 +0100 From: "Lineone" <lineonenopsamone.org> Subject: Re: Wiper pump
Ok. I understand. "Doney" <remove2reachdavedoneynopsamm.com> wrote in message news:JsiV8.43998$vq.1939832nopsam.nnrp.aus1.giganews.com... > No, it only has one nozzle but I believe all the nozzles have either a T > fitting or an L fitting. The L fitting is used if it is the last, or only > nozzle in that section of hose run. All the T or L fittings have a one way > flow valve that goes bad over time and is the reason they need replacement. > So, this L fitting is what I'm trying to find / replace on the hatch > section. > > "Lineone" <lineonenopsamone.org> wrote in message > news:VSGU8.3542$rV3.143446nopsamfep1-win.server.ntli.net... > > Interesting question. I wasn't aware there was a T piece at the back. The > > 9000CS has just one nozzle onto the rear window so I assume no T is > > necessary. Does your 900 have two nozzles? > > Adrian > > > > "Doney" <remove2reachdavedoneynopsamm.com> wrote in message > > news:EorU8.246773$_j6.12311491nopsam.nnrp.aus1.giganews.com... > > > Does anyone know how to get to the T fittings contained in the back of > the > > > '97 900SE hatch? I replaced the front Ts and that fixed the problem but > > they > > > were easy to find/replace by pulling on the washer fluid hoses. > > > > > > Looks like you need to disassemble the rear hatch somehow to get at the > > rear > > > one(s). > > > > > > Thanks in advance. > > > > > > Dave > > > > > > "Lineone" <lineonenopsamone.org> wrote in message > > > news:2KpU8.6819$Mw4.174517nopsamfep1-win.server.ntli.net... > > > > As I understand it, the problem is generally the little t-piece just > > > > downstream of the pump. Replace this first, before trying anything > else, > > > as > > > > it's really cheap. You don't even need to buy the genuine Saab part. > > > Access > > > > is as for the pump itself; i.e. remove right-front wheel and liner (as > > > > already stated). > > > > > > > > > > > > > > > > > > > > > > >
![]() |
![]() |
![]() |
![]() |
![]() |