Date: Fri, 19 Jul 2002 19:11:15 GMT From: "blickar_ut" <blickar_utnopsamail.com> Subject: Re: Help! Need to replace fuel pump 1993 900S
I just finished the same job today. I successfully removed the retaining ring with two big screwdrivers. And I mean big things. What you do is to place each screwdriver at opposite fins and let the tools form a "cross". You can adjust where you like the screwdrivers to make contact to optimize the force on the ring. You will know feel that you can bring a good force on the ring and easely get it removed. Good luck! Leif from Sweden PS. what I also heard when I bought the new (and very expensive) fuel pump is to never let the fuel level go below half filled tank and the pump will survive longer due to better cooling. "Eric Durkee" <edurkeenopsametcom.com> skrev i meddelandet news:ah4r7k$7rf$1nopsam.atl.mindspring.net... > Ok, I'm looking for anyone who has successfully removed the retaining ring > that holds the fuel pump assembly in place in the gas tank. I know that the > Haynes manual calls out a special tool that isn't available anywhere. Has > anyone out there rigged something up to do this job? I tried driving the > ring with a punch and only succeeded in breaking off a couple of the fins. > I'm thinking about making some kind of tool to emulate what Saab makes, but > if you have some tips/tricks I'd love to hear them. > > Thanks, > Eric > > >
![]() |
![]() |
![]() |
![]() |
![]() |