Date: Thu, 27 Feb 2003 19:58:50 -0400 From: Dexter J <lamealameadingdongnospamlamelame.org> Subject: Re: weird apc
Salutations: Try different variations.. # 2 might not be a ground - also - tie a wire from the bolt tab and to a handy house pipe some where - it might be grounded by the case.. I don't know why it's doing what you say - but I am actually deeply interested.. Simon Putz wrote: > > Hi, > > recently the difference between apc boost and base boost on my car was very > small. ok i fumbled around with the hoses a bit and i broke off a little bit > of a connector on the apc solenoid but that was nothign serious. so after > some research i found that basically my apc solenoid is a switch that should > switch between C-->R and C-->W. > so i checked the solenoid out at home and i found that with +12VDC between > pin 1 and 2 i can blow through C and W > but with +12VDC between pin 2 and 3 i can blow through W and R > now this is strange, did saab label my solenoid wrongly or whats going on. > any help is greatly appreciated. im now going to install the valve as if W > were C and keep you updated > i uploaded some pics at http://80.86.187.144/apc > > bye > > simon -- J Dexter - webmaster - http://www.dexterdyne.org/ all tunes - no cookies no subscription no weather no ads no news no phone in - Real Audio 8+ Required - all the Time Radio Free Dexterdyne Top Tune o'be-do-da-day Gene Kelly - Singin in the Rain http://www.dexterdyne.org/888/106.RAM