Date: Tue, 01 Jul 2003 19:40:12 GMT From: "scorpion" <larry-tobinnopsamrs.com> Subject: 92 9000S - Rear Brake Job - Any Advice Appreciated
I figure this one is old enough now that I can start beating and banging on it myself. Thought I would start with the rear brakes since the pads are at about 20 % The rotors are barely worn enough to feel a ridge but I will replace them anyway as the surface is badly pitted. Everything looks to be easy to access; ie ; bleeder and caliper bolts. There is a guide pin for the rim that has to be removed and supposedly there is an adjusting screw for the handbrake cable which I didn't see. Anyone know the correct size for the "metric" hex key neede to remove the caliper bolts? Any other surprises I should be aware of ?