Date: Fri, 27 Jun 2003 16:14:51 GMT From: Jim Collins <rubidium7nopsami.com> Subject: Re: CHeck engine flashes four times on 91 9000, what does this mean
THANKS for the EXCELLENT answer. I had changed the temperature sensor recently. Take care, JC In article <bdhbpg$pf9$1nopsamta.btinternet.com>, saabtechnopsamnnect.com says... > 1 Switch on ignition, do not start. > 2 Check engine light will come on for 6 seconds. > 3 Comes back on for 3 seconds. > 4 Goes off. > 5 Flash code begins. > 6 2 Flashes = Map sensor. > 7 3 Flashes = Intake air temp sensor. > 8 4 Flashes = Engine coolant temp sensor. > 9 5 Flashes = Throttle position sensor. > 10 6 Flashes = Oxygen sensor. > 11 7 Flashes = Adaptation. > 12 8 Flashes = EVAP can purge valve. > 13 9 Flashes = Control module Internal fault. > 12 Disconnect battery earth lead for 5 minuets to clear code. > 13 Carry out adaptation. > Regards, Tom, Saabtech. > "Andy Hookins" <andrew.hookinsnopsamamnopsamodata.co.uk> wrote in message > news:vfnsoc558p9nabnopsam.supernews.com... > > "Mark Plumlee" <turbospgnopsamsouth.net> wrote in message > > news:6ZRKa.79804$X43.17993nopsamoh1-nws5.columbus.rr.com... > > > have u tried calling a saab dealer in your area? > > > > The dealer may want you to think that is what it means ;-) > > > > Buried somewhere in the Townsend site is an explanation > > of the flash codes for some cars - seems to be down at > > the moment though :-( > > > > http://www.townsendimports.com/ > > > > AndyH > > '94 9000 CDE > > > > > > > > > > > "Jim Collins" <rubidium7nopsami.com> wrote in message > > > news:MPG.19656ddf33b375159896e8nopsamews.attbi.com... > > > > WHen I get in to start it, after the computers boot up, I get an ERR > in > > > > the info display and a CHECK ENGINE that blinks four times. Car seems > to > > > > run fine. DOes anyone know the meaning of this secret code ? > > > > Thanks > > > > JC > > > > -- > > > > Jim Collins > > > > Issaquah, WA > > > > > > > > -- Jim Collins Issaquah, WA
![]() |
![]() |
![]() |
![]() |
![]() |