Date: Tue, 6 Apr 2004 14:08:57 +0100 From: MeatballTurbo <carl.robsonnospamcing-czechs.com> Subject: Re: Changing brake pads on a C900
In article <c4u9d8$2nhmt5$1nospam63316.news.uni-berlin.de>, bennospamnail.fsworld.co.uk says... > Thanks for all the help with the leaky prob. > > Now got a brake prob - got the handbrake working by taking pads out, > cleaning everything up and adjusting as per the haynes manual. > > Couldn't get the new pads in though. I can get one pad in, but can't move > the sliding caliper far enough to get the other in! So I put the old pads > back in and it's all working, but they are shot and I would like to get the > new ones in before retest time on Thursday! > > Help! > > cheers > Ben > > > Fit the outside pad first so that it is a fairly snug fit, then wind the piston in a little so that the outside one will fit with a little tap to get it in. Should be fairly snug. I used a set of circlip pliars and took my time, but I'm going to buy one of the proper tools for next time. It could be what happened to mine. The dust sheild was damaged, and the piston wouldn't retract, so I ended up fitting the old very badly worn pads, and swapping the lot as soon as the new parts arrived. -- The poster formerly known as Skodapilot. http://www.bouncing-czechs.com
![]() |
![]() |
![]() |
![]() |
![]() |