Date: Tue, 21 Sep 2004 11:25:47 +1200 From: Richard Sutherland-Smith <richard.ssnospamr.net.nz> Subject: Re: 99/c900 Clutch Spacer Tool?
In message <2r91rlF17o4acU1nospamberlin.de> Dave Hinz <DaveHinznospamcop.net> wrote: > On Mon, 20 Sep 2004 22:46:37 +0100, Grunff <grunffnospam.com> wrote: > > Dave Hinz wrote: > > > >> Anything I'm going to run into that won't be obvious to me knowing the > >> '88 900T? > > > > Only big difference is that on a 99 there isn't enough room to remove > > the clutch shaft. So the radiator needs to come out :-( > > That whole assembly is out already. I'm fully anticipating pulling > at least the engine, and depending on where that rod bolt came through, > maybe the tranny too. If I'm going that far, I might as well take > all the easy stuff out, do a good cleaning, touch up the rust spots, > and do this thing like I mean it. Not doing a full restoration, > but if it's out, why not... > > Dave > If you are going to take the gearbox off anyway, there is no need to compress the clutch? -- Richard Sutherland-Smith 19 Webb Road, Wanganui 5001, New Zealand