Date: 20 Sep 2004 21:53:57 GMT From: Dave Hinz <DaveHinznospamcop.net> Subject: Re: 99/c900 Clutch Spacer Tool?
On Mon, 20 Sep 2004 22:46:37 +0100, Grunff <grunffnospam.com> wrote: > Dave Hinz wrote: > >> Anything I'm going to run into that won't be obvious to me knowing the >> '88 900T? > > Only big difference is that on a 99 there isn't enough room to remove > the clutch shaft. So the radiator needs to come out :-( That whole assembly is out already. I'm fully anticipating pulling at least the engine, and depending on where that rod bolt came through, maybe the tranny too. If I'm going that far, I might as well take all the easy stuff out, do a good cleaning, touch up the rust spots, and do this thing like I mean it. Not doing a full restoration, but if it's out, why not... Dave