![]() |
Date: Fri, 22 Oct 2004 16:51:41 -0400 From: "dave" <alofusblountmaybenospamel.net> Subject: Re: clutch play? (c900)
"Grunff" <grunffnospam.com> wrote in message news:2tmnpiF22enkqU2nospamberlin.de... > hippo wrote: > >> If you have to do the master cyl, put a kit through the slave cyl as >> well - >> saves it going out in sympathy 4 wks later! Cheers > > Listen to the man - this happens very often. Many theories as to why it > happens, most likely it's the new fluid that does it. > > -- > Grunff Likely they wore out at the same time. The seals on the master and slave cylinders should age at roughly the same rate. I rebuilt the master cylinder without removing it from the car. Had to be careful about the brake fluid dribbling about though. Took me about 2 hours. In retrospect I probably should have used a brake hone in the cylinder bore and cleaned things up a bit better, but I was in a hurry. I knew it would be clutch time soon, and was trying to stretch things out a bit. dave
![]() |
![]() |
![]() |
![]() |
![]() |