Date: Tue, 22 Feb 2005 01:56:14 +0000 From: Pooh Bear <rabbitsfriendsandrelationsnospamail.com> Subject: Re: OK - what's the trick to replace RHS dip beam headlamp on a 9kCSE
KeithG wrote: > You aren't. The way to do it is to remove the fastening screws and pull > the headlight unit from the car. I was wondering if that might be the way. > Remove the t-30 screws you can see. > IIRC, there are a couple of 10mm bolts as we. One is under the grille > (remove the grille to find it) Hmmm. And the trick to remove the grille is ? Haven't looked at that yet. :-) > and one is on the fender behind the turn > signal light (it is removed by unclipping and pulling forward). This > sounds complicated, but it is easier than removing the A/C compressor ;-) That much I can certainly believe ! The oil lines certainly get in the way too. I'm beginning to understand why the 9000 has a serious reputation for high service costs. Just out of interest, the LHS lamp unit seems much less crowded behind. Can you actually replace the bulb via the circular access cover on that side ? Cheers, Graham