Date: Mon, 05 Sep 2005 23:19:24 +0100 From: Grunff <grunffnospam.com> Subject: Re: Lack of Heat C900
LC wrote: > I tried this... looks to be pretty clear. The core was in near pristine > condition when I took it out the other day. > Once I put the water on, there was about a 2-3 second delay till I saw > fluid coming out of the bottom port. After that, it took about 30 seconds > to clear all the antifreeze out of the core, and flowed well throughout the > test, and I put the hose up to both ports, and water flowed well going > either direction. > > I think I got it bled correctly now.. I shut the screw when the fans were > running. > > We'll see on the temperature of the cabin air tonight once the ambient temp > outside goes down. > > I didn't turn the heat up and down.. It was set to full heat the whole > test. Well, sounds like your core is clear, and full of water. I'd hook it back up, run the engine for a while and see what happens - if you still don't get heat, then I'd start looking at the thermostat. -- Grunff