APC/DI ECU access
- Installation is the reverse of disassembly
- Locate the notches in the bottom with the tangs on the baseplate
- Rotate the front plate back into position
- It clamps the ECU in place
- Loosely install the Torx screws
- Rotate the rear (black) plate into place, then install the 8mm hex
head screws
- Snug up all screws, then re-install the seat.
StateOfNine.com
![](/tsn/xyz/stateofninebutton.gif) |
SaabClub.com
![](/tsn/xyz/scnabutton.gif) |
Jak Stoll Performance
![](/tsn/xyz/jakstollbutton.gif) |
M Car Covers
![](/tsn/xyz/mcarcoversbutton.gif) |
Ad Available
![](/tsn/xyz/buttonavailable.gif) |
![](/tsn/images/tsnmap.gif)