2003-2011 [Subscribe to Daily Digest] |
![]() | [Main 93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 06 Aero 2.8 Auto won't shift, check engine light on Posted by JustinHiFi [Email] ![]() ![]() In Reply to: 06 Aero 2.8 Auto won't shift, check engine light on, Gren1saab ![]() ![]() |
P1895 is Engine Torque No Data Bus from ECM.
P1896 is the same.
Both tell you to refer to fault codes within the engine mngt system. Since your getting P0103 for the AMM High Input, start there. Code will set if input is higher than 11500Htz. You should be able to check this on T2 value screen. Double check that all connections to the intake on the turbo and air box are tight as well. After this, as Anders says if the car is running poorly then change the AMM.
JustinHiFi
Strictly Saab
Melbourne, FL
posted by 70.119.47...
_______________________________________ JustinHiFi Strictly Saab Inc. Melbourne, FL Current: -1991 900 S-PG MT -2001 9-5 Wagon AT -2006 9-3 SS AT Past: -1964 96 2-Smoke MT -1967 96 v4 MT -1983 900 Turbo MT -1985 900 SPG MT -1988 9000 Turbo Black MT -1988 9000 Turbo White AT -1990 900 SPG Red MT -1990 900 SPG Black MT -1991 9000 Turbo MT -1991 900 SPG Red MT -1992 9000 Griffin AT -2000 9-5 Aero Sedan MT -2001 9-5 Aero Wagon MT -2008 9-3 2.0T Sedan AT
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |