2003-2011 [Subscribe to Daily Digest] |
![]() | [Main 93 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Re: 2008 Aero V6 : intermittent no crank Posted by magalar [Email] ![]() ![]() ![]() In Reply to: Re: 2008 Aero V6 : intermittent no crank, SWEDECAR ![]() ![]() |
Hi again Anders (and everyone, obviously),
Got my Tech2 this week, and I have now access to all DTCs:
U0212 - Cim missing on bus
U0121 - TCS/ESP missing on bus
U2139 - CIM missing on bus
U2170 - RDCM missing on bus
U2143 - Steering angle sensor missing on bus
U2142 - Yaw rate sensor missing on bus
U2100 - CIM was missing on P-bus
No more no-cranck conditions, but these DTCs pop-up once every 2-3 days.
I did unplug the ABS/TCS/ESP connector at the ABS module; everything inside look OK, no corrosion, burned pin or hardened plastic.
The SCL is still acting a bit; refuse to lock once in a while. It takes sometimes 2 insertion of the key in the ISM for the starter to engage. ISM is new, as is the battery (I installed an AGM this time).
Last bit of info : before I got the Tech2, I used a simple handheld code eraser to clear DTCs. So, after an event like the one above, the next morning, the car is Ok except for the MIL indicator still on. If I plug the code eraser in the OBD2 plug to clear it, then the TCS/ESP failure message/light appears instantly. Is it normal, or is it a sign of something else?
I am waiting for a RS-232/USB adaptor to arrive (I bought the proper Tripp-Lite adaptor that GM recommends for the Tech2) and I'll have TIS2000 Security Access to dig further into diagnotics and repair.
So, what is my next step?
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |