1999-2009 [Subscribe to Daily Digest] |
I have a 2002 ARC and I have the following equipment ready for installation:
SAAB phone Harness PN 12801584
Parrot CK3000
I have searched the SAABNET postings and found some very useful info, but before I proceed I wanted to make sure that I am reading the info correctly.
Alcoop had posted the following wire color info:
Pin 1 Red - 12V direct to battery - always live
Pin 2 Red\Blue - 12V live with ignition on
Pin 3 Green - Microphone Ground
Pin 4 Black - Ground
Pin 5 Yellow - Radio Mute
Pin 7 Grey\White - Telephone lineout +
Pin 8 - Blue\White - Telephone lineout Ground
Pin 10 - Grey\Brown - Microphone +
but when I looked at my phone harness I noticed that inside the plug the PIN number didn't match the colors mentioned above, for example the PIN 1 inside the plug is for the black wire, and PIN 4 is going to the Yellow wire. Before I went ahead I wanted to make sure that first my cable harness was made correctly and if so, do I just go with connecting the colors as mentioned above. Also on the PARROT web site for SAAB installs it mentioneds that some SAABs have an inverted polarity, So 12V Ignition and the 12V Permanent are inverted so change the fuses holders. Is this true.
One last thin is that if I go with the above wire scheme do I connect the orange wire coming out of the Parrot for the 12V Ignition to the Red-Blue wire coming out of the Phone Harness, even though there is an orange wire coming out of the Phone Harness which is not labeled above ?
Thanks in advance for any input.
Raj
'02 ARC Sportwagon
posted by 71.127.19...
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.