1999-2009 [Subscribe to Daily Digest] |
![]() | [Main 95 Bulletin Board | BBFAQ |
Prev by Date | Next by Date | Post Followup ]
Member Login / Signup - Members see fewer ads. - Latest Member Gallery Photos
Two items I found in old postings before I did mine.... Posted by MI-Roger [Email] ![]() ![]() In Reply to: CPS Replaced -now it's worse -Anders?, Allan, Wed, 5 Apr 2006 18:17:25 Members do not see ads below this line. - Help Keep This Site Online - Signup |
Maybe one of these is your problem:
1) Did you remove the old O-ring with the old CPS? If you can't find the old one still attached to the old CPS, or lying on the garage floor, it is possible it is still in the mounting hole interfering with proper placement of the new CPS.
2) Is the new CPS fully seated in the mounting hole? This hole apparently has a stepped bore with the smaller ID being only the final 1/8-inch or so of insertion depth. Check for any open space between the mounting ear on the new CPS and the threaded boss for the mounting screw. If the plastic ear is not fully seated on the boss then your new CPS is not fully inserted. Possibly it is hung-up on the edge of the stepped bore, or blocked by the old O-ring.
Hope this helps.
posted by 198.208.15...
_______________________________________ Saabs owned: 2008 9-5 Aero Sedan, sold at 227K miles 2006 9-3SC 2.0T - Wife's daily driver 2000 Viggen Convertible - Sold May, 2022 1964 Quantum IV Formula Car - Retirement project 2000 9-5lpt Sedan, sold at 318K miles
No Site Registration is Required to Post - Site Membership is optional (Member Features List), but helps to keep the site online
for all Saabers. If the site helps you, please consider helping the site by becoming a member.
![]() |
![]() |
![]() |
![]() |
![]() |